 |
SP800-7
RAY ATTACHMENTS
The efficiency of our concrete pile cutter is really high, for example, to cut 1000mm diameter & 1m length pile, concrete label C30, with 25T excavator, you can use our SP800 model with 8 modules, continuous work 8 hours can cut 30 piles in a day, but a worker can only cut 2-3 piles within 8 hours.
The efficiency of our pile breaker is really high.
Cylinder position: We make cylinder in front position, the force point is on the flange and the module, balance the force, protect the cylinder, and have a longer service life.
Chisels: stronger penetration and low noise.
Chain: our chain uses a lifting chain (level 80).
Tubing: tubing arrangement is more reasonable to prevent damage.
| Your problems | How can we solve it? |
| Dangerous | 1. Contact-free operation is enabled. 2. And it imposes no impact force on the parent body of the pile and no influence on the bearing capacity of the pile. |
| Slowly | 1.Replaceable and changeable module combination makes its applicable for piles with various diameters. 2.The modules can be assembled and disassembled easily and conveniently. |
| Noisy | Its full hydraulic drive causes little noises during operation and no influence on the surrounding environments |
| Expensive salary | 1.Fewer operating workers are required to save cost for labor and machines maintenance during construction. 2.Suitable for different kinds of carrier. 3.Module generalization is realized with our SP380 and SP400 square pile machine. It can be used for both circular piles and square piles by changing the module combination |
| Durable? | 1. It is made of military material by first-class suppliers with reliable quality, extending its service life. 2.The mainboard used Q345B and the chisel used the 20CrNiMo3. 3.12 month free after-sales service. 4.Provide 3 sets wear parts for chisel. 5.Professional small tools for free. |
| Model | Unit | SP800 | SP800 | SP800 | SP800 | SP800 | SP800 | SP800 | SP800 |
| Moduld number | modules | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| Range of pile breaker | mm | 500-600 | 650-800 | 850-1000 | 1050-1200 | 1250-1400 | 1450-1600 | 1650-1800 | 1850-2000 |
| Max force for single rod | KN | 650 | 650 | 650 | 650 | 650 | 650 | 790 | 650 |
| Max stroke of hydraulic cylinder | mm | 215 | 215 | 215 | 215 | 215 | 215 | 215 | 215 |
| Pressure of hydraulic cylinder | Mpa | 32-35 | 32-35 | 32-35 | 32-35 | 32-35 | 32-35 | 32-35 | 32-35 |
| Max flow for single cylinder | L/min | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Max height for each crush | mm | ≤300 | ≤300 | ≤300 | ≤300 | ≤300 | ≤300 | ≤300 | ≤300 |
| Suitable carrier | T | 20 | 22 | 26 | 27 | 30 | 32 | 35 | 36 |
| Single moulde weight | kg | 380 | 380 | 380 | 380 | 380 | 380 | 380 | 380 |
| Total pile breaker weight | kg | 2335 | 2720 | 3100 | 3480 | 3860 | 4240 | 4620 | 5000 |
In construction project involving pile foundations, one of the most cumbersome and time consuming activity is the crushing of top portion of the Castin-Situ Piles /Precast Piles as required to remove the weak top concrete and expose the reinforcement to be used for further construction. Pile breakers solve the problem by crushing such overhangs in a speedy and precise way. Thereinforcement bars are left intact facilitating the rebuilding work. The breaking down of concrete piles is an essential part of the construction process and a subject that is often not given sufficient early thought in the planning of the piling works.The adoption of a suitable pile breaking method can result in financial savings for the project and most importantly will address and reduce potential health and safety issues in relation to this phase of the works.
For round pile, the cutting diameter is 300-2000mm. And our light model, the diameter range is 300-1050mm, at least 7 modules but most 12 modules; heavy model, the diameter range is 500-2000mm, at least 6 modules and most 13 modules.
Well, square pile diameter range is 300-500mm;
Except that the SP500 is a module with 2 cylinders, the others are one module and one cylinder.
The efficiency of our concrete pile cutter is really high, for example, to cut 1000mm diameter & 1m length pile, concrete label C30, with 25T excavator, you can use our SP800 model with 8 modules, continuous work 8 hours can cut 30 piles in a day, but a worker can only cut 2-3 piles within 8 hours.
The efficiency of our pile breaker is really high.
Cylinder position: We make cylinder in front position, the force point is on the flange and the module, balance the force, protect the cylinder, and have a longer service life.
Chisels: stronger penetration and low noise.
Chain: our chain uses a lifting chain (level 80).
Tubing: tubing arrangement is more reasonable to prevent damage.
| Your problems | How can we solve it? |
| Dangerous | 1. Contact-free operation is enabled. 2. And it imposes no impact force on the parent body of the pile and no influence on the bearing capacity of the pile. |
| Slowly | 1.Replaceable and changeable module combination makes its applicable for piles with various diameters. 2.The modules can be assembled and disassembled easily and conveniently. |
| Noisy | Its full hydraulic drive causes little noises during operation and no influence on the surrounding environments |
| Expensive salary | 1.Fewer operating workers are required to save cost for labor and machines maintenance during construction. 2.Suitable for different kinds of carrier. 3.Module generalization is realized with our SP380 and SP400 square pile machine. It can be used for both circular piles and square piles by changing the module combination |
| Durable? | 1. It is made of military material by first-class suppliers with reliable quality, extending its service life. 2.The mainboard used Q345B and the chisel used the 20CrNiMo3. 3.12 month free after-sales service. 4.Provide 3 sets wear parts for chisel. 5.Professional small tools for free. |
| Model | Unit | SP800 | SP800 | SP800 | SP800 | SP800 | SP800 | SP800 | SP800 |
| Moduld number | modules | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| Range of pile breaker | mm | 500-600 | 650-800 | 850-1000 | 1050-1200 | 1250-1400 | 1450-1600 | 1650-1800 | 1850-2000 |
| Max force for single rod | KN | 650 | 650 | 650 | 650 | 650 | 650 | 790 | 650 |
| Max stroke of hydraulic cylinder | mm | 215 | 215 | 215 | 215 | 215 | 215 | 215 | 215 |
| Pressure of hydraulic cylinder | Mpa | 32-35 | 32-35 | 32-35 | 32-35 | 32-35 | 32-35 | 32-35 | 32-35 |
| Max flow for single cylinder | L/min | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Max height for each crush | mm | ≤300 | ≤300 | ≤300 | ≤300 | ≤300 | ≤300 | ≤300 | ≤300 |
| Suitable carrier | T | 20 | 22 | 26 | 27 | 30 | 32 | 35 | 36 |
| Single moulde weight | kg | 380 | 380 | 380 | 380 | 380 | 380 | 380 | 380 |
| Total pile breaker weight | kg | 2335 | 2720 | 3100 | 3480 | 3860 | 4240 | 4620 | 5000 |
In construction project involving pile foundations, one of the most cumbersome and time consuming activity is the crushing of top portion of the Castin-Situ Piles /Precast Piles as required to remove the weak top concrete and expose the reinforcement to be used for further construction. Pile breakers solve the problem by crushing such overhangs in a speedy and precise way. Thereinforcement bars are left intact facilitating the rebuilding work. The breaking down of concrete piles is an essential part of the construction process and a subject that is often not given sufficient early thought in the planning of the piling works.The adoption of a suitable pile breaking method can result in financial savings for the project and most importantly will address and reduce potential health and safety issues in relation to this phase of the works.
For round pile, the cutting diameter is 300-2000mm. And our light model, the diameter range is 300-1050mm, at least 7 modules but most 12 modules; heavy model, the diameter range is 500-2000mm, at least 6 modules and most 13 modules.
Well, square pile diameter range is 300-500mm;
Except that the SP500 is a module with 2 cylinders, the others are one module and one cylinder.
