vibration ripper is used for marble and adamas
Product Description
It’s a new generation attachment recently developed and manufactured to effectively excavator, crush and destroy the soft rock mass such as rocks weathered by wind and water, hard soil, slate, quartz, concrete and Asphalt.
Vibro ripper makes light work of ripping the soil to make excavation productive and easier. Practically no modification is required to switch from working on land to water. Also, inexpensive easily replaceable wear tool is provided for economical operation, this can be changed according to the strata to be ripped.
1. Enhance 3-5 times higher output (compare with regular breaker equipment)
2. Reduce synthesize fuel consumption
3. Reduce unit output emission load
4. Work under water and subsurface without refit (10-15m)
5. Minimum damage to excavator's bumps and arms (protect excavator)
6. Enhance comfort level during operate
7. Minimum operating noise (working noise is only 50-75 db)
8. Lower maintain
9. Lower vulnerable part cost
10.Enhance parts and full equipment working life
How to choose suitable model?
1.make sure the weight of excavator:
| Type | RVR-D6 | RVR-D8 | RVR-D10 | |
| Excavator(T) | 50-65 | 70-90 | 100-190 | |
| Working flow(L/min) | 360-400 | 420-460 | 450-500 | |
| Working Pressure（MPa） | 25-28 | 25-28 | 25-28 | |
| Size | Length | 4500mm | 4800mm | 4500mm |
| Width | 1300mm | 1300mm | 1400mm | |
| Height | 1650mm | 1850mm | 2000mm | |
| Weight(Kg) | 6500 | 7600 | 7800 | |
| Hose size(G) | 11/2′ | 11/2′ | 11/2′ | |
| Impact power(KN) | 468 | 599 | 736 | |
| Motor Model (CC) | 90*2 | 108*2 | 130*2 | |
| Power (KW) | 160-200 | 190-230 | 210-240 | |
Make sure the hardness of Rock:
| Model | Mohs’ hardness reference table & rock type | |||
| RVR-D6,RVR-D8, RVR-D10 | 9-10 hardness level standard mineral: Marble, Adamas Weakly weathered Sandstone,conglomerate,limestone,shale,Limestone,Dolomite Moderately differentiated or Weakly weathered Sandstone,conglomerate,limesto-ne,shale,Limestone,Dolomite | |||
If you are not sure the material you can take photos and send to us. We will help you to find the most suitable model.
Structure
Extra spare parts for free
1. Teeth assembly: 1 piece
2. Air spring: 1 pieces
3. Damping device: 1 piece
4. Common tools: a few of pieces
5. Thermometer: 1 piece
FAQ
Q: Are you a manufacturer?
A: Yes,our factory was established in 2002 and we have our own trading company.
Q: Are you sure your product will fit my excavator?
A: Yes, we are professional about this, you can also tell me your excavator model, and we will check it for you.
Q: Can you provide customers' design?
A: Sure, we can provide OEM and ODM service.
Q: What's the MOQ and payment terms?
A: MOQ is 1set. Payment via T/T,L/C, Western Union accepted, other terms can be negotiated.
Q: How about delivery time?
A: 5-25 work days after the payment, depend on your quantity.
Q: How about the package?
A: Our hydraulic breaker wrapped by stretch film, packed by pallet or polywood case.
Q: Which country have you exported?
A: Vietnam, Saudi Arabia, America, Thailand, New Zealand, Canada, Australia, Peru, Chile, Brazil, Mexico, Iran, South Africa, etc.